The MGC-203 lever-operated manual gauge control air ring fits blown film extrusion dies from 8 to 10 inches. Equipped with independent manual levers for each airflow zone, operators can adjust cooling air distribution to correct film thickness deviation manually. The air ring's optimized air gap design provides uniform base cooling for the film bubble, while lever controls handle fine thickness correction. It is a reliable manual cooling solution for medium-output packaging film lines without automatic EGC systems, offering proven performance at a lower capital cost.
Key Features
Optimized air gap for base cooling
Independent manual lever per zone
Manual correction for film gauge deviation
Stable for continuous production
Simple mechanical structure
Easy on-site maintenance
6 adjustment zones
Cast aluminum body
Technical Specifications
Die Size Range: 8"–10" (200–250 mm)
Air Ring Stage: Single-stage
Adjustment Zones: 6
Material: Cast aluminum alloy
Weight: 74 kg
Air Inlet: Dual 5" (127 mm)
Max Output: 200 kg/h
Vane Type: Lever-operated
Temperature Data
Operating Temperature Range: 5°C – 65°C
Max Short-Term Exposure: 85°C
Recommended Cooling Air Temp: 18°C – 24°C
Max Air Inlet Temp: 45°C
Storage Temperature: -10°C – 60°C
Product Model | MGC-203 | MGC-103 | MGC-153 |
Die Size Range | 8"–10" (200–250 mm) | 4"–6" (100–150 mm) | 6"–8" (150–200 mm) |
Adjustment Zones | 6 | 4 | 4 |
Weight | 74 kg | 38 kg | 52 kg |
Air Inlet | Dual 5" (127 mm) | Single 4" (102 mm) | Single 5" (127 mm) |
Max Output | 200 kg/h | 80 kg/h | 140 kg/h |
