top of page

HR-700 High-Lift Special Application Air Ring

HR-700

The HR-700 is a high-lift, large-format air ring purpose-built for 30 to 36-inch dies running wide-width agricultural and industrial films at frost lines up to 1.8 meters. Its extra-tall upper lip geometry provides the extended cooling curtain needed to stabilize tall bubbles on large-diameter lines. Ten evenly spaced inlets, or dual 12-inch connections, deliver the high air volume required. The HR-700 supports EGC 252-zone automatic gauge control and is compatible with rotating die assemblies. Segmented ring construction means the unit can be transported and rigged through standard plant access. Field service engineers are available for on-site commissioning support.

Key Features

Extra-tall upper lip for maximum frost-line lift
Ten-point inlet plenum for large-diameter uniformity
High-lift geometry achieves frost lines up to 1.8 m
Supports EGC 252-zone gauge control on rotating dies
Reinforced segmented construction for rigging
Bubble cage interface for large IBC manifolds
Heavy-gauge mounting flange matches large die bolts
On-site commissioning support available

Technical Specifications    

Die Size Range: 30"–36" (750–900 mm)
Plenum Diameter: 76" (1930 mm)
Air Inlet: Multi 10 × 4" or Dual 2 × 12" (305 mm)
Air Requirements: 4800–6500 CFM (8160–11050 m³/h)
Air Ring Type: Two-Stage, High-Lift, Heavy-Duty
Construction: Anodized Aluminum 6061-T6
Weight: 320 kg
Recommended Film Thickness: 80–600 µm
Compatible Materials: LDPE, LLDPE, mPE, PP, HDPE, PA, EVOH

Temperature Data    

Operating Temperature Range: 5°C – 60°C
Max Short-Term Exposure: 75°C
Recommended Cooling Air Temp: 18°C – 24°C
Max Air Inlet Temp: 45°C

Product Model
HR-700
HR-800
HR-900
Die Size Range
30"–36" (750–900 mm)
36"–42" (900–1050 mm)
42"–48" (1050–1200 mm)
Plenum Diameter
76" (1930 mm)
84" (2134 mm)
96" (2438 mm)
Air Inlet
Multi 10 × 4" or Dual 2 × 12" (305 mm)
Multi 12 × 4" or Dual 2 × 12" (305 mm)
Multi 14 × 4" or Triple 3 × 12" (305 mm)
Air Requirements
4800–6500 CFM (8160–11050 m³/h)
6500–8500 CFM (11050–14450 m³/h)
8500–11000 CFM (14450–18700 m³/h)
Air Ring Type
Two-Stage, High-Lift, Heavy-Duty
Two-Stage, High-Lift, Extra-Heavy-Duty
Two-Stage, Extra-Wide, Heavy-Duty
Construction
Anodized Aluminum 6061-T6
Anodized Aluminum 6061-T6
Aluminum 6061-T6, Steel Reinforced
Weight
320 kg
450 kg
620 kg
Recommended Film Thickness
80–600 µm
100–800 µm
120–1000 µm
Compatible Materials
LDPE, LLDPE, mPE, PP, HDPE, PA, EVOH
LDPE, LLDPE, HDPE, mPE, PP, PA, EVOH
LDPE, LLDPE, HDPE, mPE, PP, PA, EVOH, TIE
Operating Temperature Range
5°C – 60°C
5°C – 60°C
5°C – 55°C

Contact Us

© 2019 by 2P+  (PPPlus)

bottom of page