top of page

HR-500 Dual-Stage High-Output Air Ring

HR-500

The HR-500 is engineered for 20 to 24-inch dies running wide-width, heavy-gauge industrial films at outputs up to 650 kg/h. Its eight-point inlet plenum is critical at this diameter: fewer inlets would create measurable pressure differentials around the bubble, causing gauge variations that show up as film quality defects. The dual-stage vane rings provide independent control of bubble formation and frost line, and the unit is pre-configured for EGC 204-zone automatic gauge control. An optional ceramic-coated wear surface extends service life when running filled or abrasive formulations. Every HR-500 undergoes factory pressure-decay and air-flow mapping testing before shipment.

Key Features

Eight-point inlet plenum for circumferential uniformity
Engineered for wide-width heavy-gauge film
Dual-stage vane rings with locking quadrant indicators
Supports EGC 204-zone automatic gauge control
Reinforced structural ring for high-pressure operation
Field-serviceable lip and vane assemblies
Optional ceramic-coated wear surfaces
Factory pressure-decay and air-flow mapping test

Technical Specifications    

Die Size Range: 20"–24" (500–600 mm)
Plenum Diameter: 64" (1626 mm)
Air Inlet: Multi 8 × 4" or Single 1 × 10" (254 mm)
Air Requirements: 2600–3500 CFM (4420–5950 m³/h)
Air Ring Type: Two-Stage, Independently Controlled
Construction: Anodized Aluminum 6061-T6
Weight: 165 kg
Recommended Film Thickness: 50–400 µm
Compatible Materials: LDPE, LLDPE, mPE, PP, PA, EVOH, PET

Temperature Data    

Operating Temperature Range: 5°C – 60°C
Max Short-Term Exposure: 80°C
Recommended Cooling Air Temp: 18°C – 24°C
Max Air Inlet Temp: 45°C

Product Model
HR-500
HR-300
HR-400
Die Size Range
20"–24" (500–600 mm)
12"–16" (300–400 mm)
16"–20" (400–500 mm)
Plenum Diameter
64" (1626 mm)
48" (1220 mm)
56" (1422 mm)
Air Inlet
Multi 8 × 4" or Single 1 × 10" (254 mm)
Multi 6 × 4" (102 mm)
Multi 6 × 4" or Single 1 × 10" (254 mm)
Air Requirements
2600–3500 CFM (4420–5950 m³/h)
1200–1800 CFM (2040–3060 m³/h)
1800–2600 CFM (3060–4420 m³/h)
Weight
165 kg
78 kg
115 kg
Recommended Film Thickness
50–400 µm
30–250 µm
40–300 µm
Compatible Materials
LDPE, LLDPE, mPE, PP, PA, EVOH, PET
LDPE, LLDPE, mPE, PP, PA, EVOH
LDPE, LLDPE, mPE, PP, PA, EVOH, TIE
Operating Temperature Range
5°C – 60°C
5°C – 65°C
5°C – 60°C

Contact Us

© 2019 by 2P+  (PPPlus)

bottom of page