The HR-300 dual-stage air ring represents a significant step up in cooling capability for 12 to 16-inch dies. By separating the primary and secondary cooling air streams into two independently controlled stages, the HR-300 gives process engineers unprecedented ability to profile the cooling curve: the lower stage sets initial bubble diameter and establishes gauge, while the upper stage stabilizes the frost line and completes heat extraction. Six evenly spaced 4-inch inlets feed the plenum, eliminating hot spots around the bubble. This is the air ring of choice for multi-layer barrier structures containing EVOH or PA, where consistent cooling is essential to layer uniformity. The HR-300 is EGC-ready, meaning it can be field-upgraded to automatic gauge control.
Key Features
Two independently controlled air stages
Lower stage sets bubble diameter; upper stage stabilizes frost line
Six-point multi-inlet plenum ensures uniformity
Ideal for multi-layer barrier film and high-output LLDPE
Separate vane controls for each stage
Rugged cast aluminum lower ring
EGC gauge control system retrofit-ready
Factory-balanced and dynamically tested
Technical Specifications
Die Size Range: 12"–16" (300–400 mm)
Plenum Diameter: 48" (1220 mm)
Air Inlet: Multi 6 × 4" (102 mm)
Air Requirements: 1200–1800 CFM (2040–3060 m³/h)
Air Ring Type: Two-Stage, Independently Controlled
Construction: Anodized Aluminum 6061-T6
Weight: 78 kg
Recommended Film Thickness: 30–250 µm
Compatible Materials: LDPE, LLDPE, mPE, PP, PA, EVOH
Temperature Data
Operating Temperature Range: 5°C – 65°C
Max Short-Term Exposure: 80°C
Recommended Cooling Air Temp: 18°C – 24°C
Max Air Inlet Temp: 45°C
Product Model | HR-300 | HR-400 | HR-500 |
Die Size Range | 12"–16" (300–400 mm) | 16"–20" (400–500 mm) | 20"–24" (500–600 mm) |
Plenum Diameter | 48" (1220 mm) | 56" (1422 mm) | 64" (1626 mm) |
Air Inlet | Multi 6 × 4" (102 mm) | Multi 6 × 4" or Single 1 × 10" (254 mm) | Multi 8 × 4" or Single 1 × 10" (254 mm) |
Air Requirements | 1200 –1800 CFM (2040–3060 m³/h) | 1800–2600 CFM (3060–4420 m³/h) | 2600–3500 CFM (4420–5950 m³/h) |
Weight | 78 kg | 115 kg | 165 kg |
Recommended Film Thickness | 30–250 µm | 40–300 µm | 50–400 µm |
Compatible Materials | LDPE, LLDPE, mPE, PP, PA, EVOH | LDPE, LLDPE, mPE, PP, PA, EVOH, TIE | LDPE, LLDPE, mPE, PP, PA, EVOH, PET |
Operating Temperature Range | 5°C – 65°C | 5°C – 60°C | 5°C – 60°C |
