The EGC-701 retrofit kit allows existing 30 to 36-inch air ring equipment to be upgraded with automatic thickness control without full replacement of the whole cooling system. The kit includes scanning sensor, control cabinet, actuators, wiring and installation guides. It can be fitted onto most brands of existing high-output air rings, bringing automatic gauge control function to old production lines. This is a cost-effective solution for factories wanting to improve film quality without purchasing completely new blown film cooling equipment, typically delivering payback within 12 to 18 months through scrap reduction alone.
Key Features
Retrofit upgrade for existing air rings
No full cooling system replacement required
Complete package: sensor + actuator + controller
Compatible with most mainstream air ring brands
Cost saving compared to new equipment
Step-by-step installation manual
Up to 252 control zones
On-site technical guidance available
Technical Specifications
Die Size Range: 30"–36" (750–900 mm)
Control Zones: 252
Max Line Speed: 220 m/min
Gauge Tolerance: ±0.12 µm
Sensor Type: Capacitive non-contact
Power Supply: 380V three phase, 50/60 Hz
Air Pressure Required: 25" H2O (6.2 kPa)
Kit Includes: sensor, actuator, cabinet, cables, fittings
Compatibility: Most major air ring brands
Temperature Data
Operating Temperature Range: 5°C – 45°C
Max Cabinet Surface Temp: 55°C
Recommended Ambient: 18°C – 28°C
Sensor Head Max Temp: 60°C
Storage Temperature: -10°C – 60°C
Product Model | EGC-701 | EGC-801 | EGC-901 |
Die Size Range | 30"–36" (750–900 mm) | 36"–42" (900–1050 mm) | 42"–48" (1050–1200 mm) |
Control Zones | 252 | 252 | 252+ |
Max Line Speed | 220 m/min | 220 m/min | 200 m/min |
Gauge Tolerance | ±0.12 µm | ±0.12 µm | ±0.15 µm |
