top of page

EGC-151 Standard External Gauge Control System

EGC-151

The EGC-151 automatic gauge control system is engineered for blown film lines equipped with 6 to 8-inch die heads. It provides continuous 360-degree thickness measurement across the bubble, automatically adjusting airflow distribution of the air ring to eliminate thin or thick spots on plastic film. The system stores historical production data for quality traceability and supports alarm notifications when film thickness exceeds preset limits. Optimized for medium output PE film lines, it helps manufacturers stabilize product quality and cut down scrap loss during long continuous production runs. The modular design simplifies on-site installation and future maintenance, and the touchscreen interface offers clear visualization of gauge profiles and correction trends.

Key Features

360° continuous bubble scanning
Automatic airflow correction via sliding fingers
Historical production data logging
Over-tolerance alarm function
Modular construction
Compatible with most standard single-stage air rings
Up to 168 control zones
Trend and statistical analysis display

Technical Specifications    

Die Size Range: 6"–8" (150–200 mm)
Control Zones: 168
Max Line Speed: 150 m/min
Gauge Tolerance: ±0.18 µm
Sensor Type: Capacitive non-contact
Power Supply: 220V single phase, 50/60 Hz
Air Pressure Required: 25" H2O (6.2 kPa)
Enclosure Rating: IP54
Sensor Placement: Around-the-bubble

Temperature Data    

Operating Temperature Range: 5°C – 45°C
Max Cabinet Surface Temp: 55°C
Recommended Ambient: 18°C – 28°C
Sensor Head Max Temp: 60°C
Storage Temperature: -10°C – 60°C

Product Model
EGC-151
EGC-101
EGC-201
Die Size Range
6"–8" (150–200 mm)
4"–6" (100–150 mm)
8"–10" (200–250 mm)
Control Zones
168
108
168
Max Line Speed
150 m/min
120 m/min
180 m/min
Gauge Tolerance
±0.18 µm
±0.2 µm
±0.15 µm
Sensor Placement
Around-the-bubble
—
Around-the-bubble

Contact Us

© 2019 by 2P+  (PPPlus)

bottom of page