The EGC-101 is our entry-level automatic film thickness control system designed for small blown film lines with 4 to 6-inch die sizes. It continuously scans the extruded film web, measures gauge variations in real time, and sends closed-loop adjustment signals to the air ring vanes to compensate for thickness deviation. This system stabilizes film tolerance, reduces scrap rate and improves consistency for low to medium output production lines. Built with durable industrial sensors and a user-friendly control panel, it delivers reliable performance for polyethylene packaging film production. Operators can monitor thickness trends, set target gauge values and log production data directly from the touchscreen interface, making it an ideal upgrade for small converters seeking automatic gauge control without a large capital investment.
Key Features
Real-time film thickness scanning
Closed-loop automatic vane adjustment
Touchscreen HMI for parameter setup
High-precision non-contact capacitive sensor
Reduces raw material waste by 50%+
Simple installation and maintenance
Data logging and trend display
Over-tolerance alarm notification
Technical Specifications
Die Size Range: 4"–6" (100–150 mm)
Control Zones: 108
Max Line Speed: 120 m/min
Gauge Tolerance: ±0.2 µm
Sensor Type: Capacitive non-contact
Power Supply: 220V single phase, 50/60 Hz
Air Pressure Required: 25" H2O (6.2 kPa)
Enclosure Rating: IP54
Cabinet Material: Steel with powder coat
Temperature Data
Operating Temperature Range: 5°C – 45°C
Max Cabinet Surface Temp: 55°C
Recommended Ambient: 18°C – 28°C
Sensor Head Max Temp: 60°C
Storage Temperature: -10°C – 60°C
Product Model | EGC-101 | EGC-151 | EGC-201 |
Die Size Range | 4"–6" (100–150 mm) | 6"–8" (150–200 mm) | 8"–10" (200–250 mm) |
Control Zones | 108 | 168 | 168 |
Max Line Speed | 120 m/min | 150 m/min | 180 m/min |
Gauge Tolerance | ±0.2 µm | ±0.18 µm | ±0.15 µm |
Sensor Placement | — | Around-the-bubble | Around-the-bubble |
