The EGC-1001 custom retrofit gauge control kit is built for blown film dies larger than 48 inches, or non-standard customized blown film extrusion lines. We tailor sensor mounting structure, actuator layout and control program according to your unique air ring and line condition. The custom kit enables automatic thickness control on non-standard large blown film bubbles, solving thickness fluctuation challenges for special film formulations and customized production lines. Full engineering support is provided from design, manufacturing to on-site commissioning, ensuring the system integrates seamlessly with your existing equipment.
Key Features
Fully customized for non-standard large dies
Custom sensor mounting bracket
Tailored control program
Full engineering design support
Adapts special film formulation production
On-site commissioning service available
Unlimited control zone count
CFD-assisted actuator layout design
Technical Specifications
Die Size Range: 48"+ (1200 mm+)
Control Zones: Customized
Max Line Speed: Customized
Gauge Tolerance: Customized
Sensor Type: Capacitive / Nuclear / X-Ray
Power Supply: Customized
Air Pressure Required: 25" H2O (6.2 kPa)
Kit Includes: custom sensor, actuator, cabinet, cables
Engineering Support: Full design to commissioning
Temperature Data
Operating Temperature Range: 5°C – 45°C
Max Cabinet Surface Temp: 55°C
Recommended Ambient: 18°C – 28°C
Sensor Head Max Temp: 60°C
Storage Temperature: -10°C – 60°C
Product Model | EGC-1001 | EGC-101 | EGC-151 |
Die Size Range | 48"+ (1200 mm+) | 4"–6" (100–150 mm) | 6"–8" (150–200 mm) |
Control Zones | Customized | 108 | 168 |
Max Line Speed | Customized | 120 m/min | 150 m/min |
Gauge Tolerance | Customized | ±0.2 µm | ±0.18 µm |
Sensor Type | Capacitive / Nuclear / X-Ray | Capacitive non-contact | Capacitive non-contact |
Power Supply | Customized | 220V single phase, 50/60 Hz | 220V single phase, 50/60 Hz |
Enclosure Rating | — | IP54 | IP54 |
Product Type | Custom Retrofit Kit | Standard EGC | Standard EGC |
