top of page

HR-200 Single-Stage High-Output Air Ring

HR-200

Designed for 8 to 10-inch dies running heavier gauge industrial film, the HR-200 delivers cooling air at throughputs up to 200 kg/h through its dual opposed inlet configuration. Balanced plenum pressure is critical at this size, and the reinforced ring housing prevents distortion even when blower static pressure reaches 30 inches water column. The oversized manual vane dial can be adjusted while wearing gloves, making on-line tuning practical for operators. A split-ring housing means the air ring can be installed or removed without disassembling the die, dramatically reducing changeover time. An optional IBC-ready top flange field-upgrades the unit for future internal bubble cooling integration.

Key Features

Dual opposed air inlets for balanced plenum pressure
High-output dual-lip design supports up to 200 kg/h
Oversized manual vane dial for gloved operation
Reinforced plenum ring resists deformation at high pressure
Optional IBC-ready top flange available
Corrosion-resistant anodized finish
Split-ring housing enables die-less installation
Temperature-resistant silicone seal kit included

Technical Specifications    

Die Size Range: 8"–10" (200–250 mm)
Plenum Diameter: 36" (914 mm)
Air Inlet: Dual 2 × 5" (127 mm)
Air Requirements: 550–850 CFM (930–1450 m³/h)
Air Ring Type: Single-Stage, Dual Lip
Construction: Anodized Aluminum 6061-T6
Weight: 38 kg
Recommended Film Thickness: 20–150 µm
Compatible Materials: LDPE, LLDPE, mPE, PP, EVA

Temperature Data    

Operating Temperature Range: 5°C – 65°C
Max Short-Term Exposure: 80°C
Recommended Cooling Air Temp: 18°C – 24°C
Max Air Inlet Temp: 45°C

Product Model
HR-200
HR-100
HR-150
Die Size Range
8"–10" (200–250 mm)
4"–6" (100–150 mm)
6"–8" (150–200 mm)
Plenum Diameter
36" (914 mm)
24" (610 mm)
30" (762 mm)
Air Inlet
Dual 2 × 5" (127 mm)
Single 1 × 4" (102 mm)
Single 1 × 5" (127 mm)
Air Requirements
550–850 CFM (930–1450 m³/h)
200–350 CFM (340–600 m³/h)
350–550 CFM (600–930 m³/h)
Weight
38 kg
18 kg
26 kg
Recommended Film Thickness
20–150 µm
15–75 µm
15–100 µm
Compatible Materials
LDPE, LLDPE, mPE, PP, EVA
LDPE, LLDPE, EVA, mPE
LDPE, LLDPE, EVA, PP, mPE

Contact Us

© 2019 by 2P+  (PPPlus)

bottom of page